Dynaudio Professional BM12 mkIII – active studio monitor

$1,999.00$3,999.00 inc GST

Dynaudio Professional BM12 mkIII is an active studio monitor providing faithful transient response and an SPL of 123 dB for larger listening environments. Bundled with IsoAcoustics ISO-L8R200 speaker stand for decoupling and proper angling.

Clear
SKU: N/A Category:

Description

Dynaudio Professional BM12 mkIII is an active studio monitor providing faithful transient response and an SPL of 123 dB for larger listening environments. Bundled with IsoAcoustics ISO-L8R200 speaker stand for decoupling and proper angling.

The BM12 mkIII expands on the legacy of the classic BM12A design. Re-voiced around Dynaudio’s next generation waveguide, the BM12 mkIII has been designed around highly efficient hand-crafted neodymium drivers, providing faithful transient response and an SPL of 123 dB for larger listening environments.
Double neodymium magnet system with vented pole piece for accurate driver control. Large diameter voice coil surrounds the magnet for superior linearity. Aluminum voice coil former and wire are low mass so transient response is quick and accurate. Diaphragm and dust cap are moulded as one piece in patented low-mass, highly rigid Magnesium Silicate providing unrivaled accuracy.

Dynaudio Professional BM12 mkIII – Features

  • 8″ Nearfield Monitor
  • Handcrafted aluminum drivers
  • Class AB amplification
  • Bundled with IsoAcoustics ISO-L8R200 speaker stand for decoupling and proper angling
  • Made in Denmark

Dynaudio Professional BM12 mkIII – Technical

  • 100W LF and 50W HF Class AB amplifier
  • Extended excursion 8″ woofer with pure aluminum voice coil
  • 1.1″ soft dome tweeter with pure aluminum voice coil
  • 123dB SPL peak power output
  • Frequency response of 38Hz-21kHz
  • HF, MF, LF analog room filters allow flexible positioning
  • High pass filters at 60/80Hz for perfect subwoofer adaption
  • Input sensitivity switch (-10/+4dB range)
Dynaudio Professional BM12 mkIII – active studio monitor was last modified: November 5th, 2015 by Doug Watt

Additional information

Brand

Dynaudio Professional

Unit of Measure

each, pair

Specifications

System: Two-way Active Nearfield Monitor
Max SPL 1m, pair (IEC Short Term): 123 dB peak
Input level for 85 dB SPL @ 1m: -18 dBu RMS @ 0 dB setting
Frequency Response (+/- 3 dB): 38 Hz – 21 kHz
Power consumption: Idle: 15W Max: 130 W
Amplifier power: Tweeter: 50 Woofer: 100 W
Resonance Frequency: 40 Hz
Bass Principle: Bass reflex
Crossover Frequencies: 1500 Hz
Crossover Slope: 6 dB/oct
Tweeter: Esotec 28 mm/1.1“ soft dome, Rear chamber, Magnetic fluid, 4 mm alu front, Pure alu wire voice coil
Woofer: 200 mm/8”, One-piece molded poly-prop cone, 75 mm/3” kapton voice coil, Neodymium magnet
Weight: 12,5 kg / 27.5 lbs
Dimensions (W x H x D): 234 x 369 x 328 mm / 9.2” x 14.6” x 12.9”
Dynaudio Professional BM12 mkIII – active studio monitor was last modified: November 5th, 2015 by Doug Watt

Product Enquiry