DPA d:vote 4099U – universal clip microphone

$699.00 inc GST

DPA d:vote 4099U is a miniature super-cardioid condenser microphone for PA amplification and live recording of slim bodied and unusually shaped instruments.

SKU: DP-VO4099U Category:

Description

DPA d:vote 4099U is a miniature super-cardioid condenser microphone for PA amplification and live recording of slim bodied and unusually shaped instruments.

The design of the microphone clip includes a hook-and-loop fastener strap which allows it to fit instruments of varying sizes and diameters such as the oboe, clarinet, bassoon, recorder and flute.
The fastener strap pulls tight to fit the circumference of the instrument, like a wrist watch on your arm.

On instruments of a large diameter, additional fastener straps can easily be added to extend the clip’s reach. The d:vote™ 4099U Universal Instrument Microphone is elegant, lightweight, unobtrusive and designed to stay out of the way during performances. The d:vote™ 4099U Universal Instrument Microphone includes a revolutionary ‘90°’ system which provides a wide range of mounting options. By detaching the clip from the gooseneck and re-mounting it turned 90°, the number of mic positions is doubled.

DPA d:vote 4099U – Features

  • high level gain-before-feedback
  • compatible with all major wireless systems
  • very flexible mounting – can adjust position with one hand
  • clip will nor mark or scratch instrument
  • optional cables and gooseneck extender to optimise sweet spot

DPA d:vote 4099U – Optional accessories

DPA d:vote 4099U – Video

DPA d:vote 4099U – universal clip microphone was last modified: March 11th, 2017 by Doug Watt

Additional information

Brand

DPA

Unit of Measure

each

Specifications

Directional characteristics: Supercardioid
Principle of operation: Pressure gradient
Cartridge type: Pre-polarized condenser
Frequency range: 20 Hz to 20 kHz
Frequency range, ± 2 dB, 20 cm (7.9 in) distance: 80 Hz to 15 kHz with 2 dB soft boost at 10 to 12 kHz, Second order low-cut filter at 80 Hz with DAD4099-BC
Sensitivity, nominal, ±3 dB: 6 mV/Pa; – 44,5 dB re. 1 V/Pa
Equivalent noise level A-weighted: Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 71 dB
Total harmonic distortion (THD): <1 % up to 123 dB SPL peak; <1 % up to 120 dB SPL RMS sine
Dynamic range: 100 dB
Max. SPL, peak before clipping: 142 dB
Output impedance: From MicroDot: 30 to 40 ohm, from DAD4099-BC: 100 ohm
Cable drive capability: 300 m (984 ft) with DAD4099-BC
Output balance principle: Signal balanced with DAD4099-BC XLR adapter
Common Mode Rejection Ratio (CMRR): > 60 dB at 50 Hz to 15 kHz with DAD4099-BC XLR adapter
Power supply: Min. 5 V to max. 50 V through DPA adapter for wireless systems; 48 V phantom power ±4 V with DAD4099-BC XLR adapter
Current consumption: 1.5 mA; 3.5 mA with DAD4099-BC XLR adapter
Connector: MicroDot
Color: Black
Weight: 36 g (1.27 oz)
Capsule diameter: 5.4 mm (0.2 in)
Microphone length: 45 mm (1.8 in)
Cable length: 1.8 m (6 ft)
Polarity: Positively increasing sound pressure produces positive going voltage at MicroDot pin (and pin 2 on DAD4099-BC XLR adapter)
Operating temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
Relative humidity: Up to 90 %
Gooseneck, length: 140 mm (5.5 in)
Holder: Fits instruments with a body depth between 35 mm (1.4 in) and 122 mm (4.8 in)
DPA d:vote 4099U – universal clip microphone was last modified: March 11th, 2017 by Doug Watt

Product Enquiry

You may also like…